We have 80 products that are suitable for your selection. They are listed below. To ask us about any of them, simply pick up the phone or click the "i" icon next to each one.
- The Type 167A is a compact, three-way switching valve usually installed to provide lock-up action should the system operation deviate from normal. This valve can be field or panel-mounted.
- The 67C Series direct-operated regulators and filter regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. These are suitable for most air or gas applications.
- The Types 1301F and 1301G regulators are self-operated, high-pressure regulators, which can be used where high pressure gas must be reduced for use as pilot supply pressure in pilot-operated regulators or as loading pressure in pressure-loaded regulators. Types 1301F and 1301G regulators can also be used in many other applications as high-pressure reducing regulators for various gases.
- The 64 Series regulators are typically used to provide reduced pressures to pneumatic and electropneumatic instruments. The Type 64R has token internal relief. The 64 Series regulators are suitable for other air applications, including air chucks, air jets, and spray guns.
- Types 1098-EGR and 1098H-EGR regulators provide economical and accurate pressure control in a wide variety of applications; natural gas distribution systems; fuel gas supply to industrial boilers, furnaces, ovens, and mixers; and large commercial / industrial establishments such as shopping centers and schools. They are also used in plant air service and in liquid service where a slow stroking time (approximately 30 to 90 seconds) is desired on both opening and closing the main valve.
- The 299H Series pressure reducing regulators provide a broad capacity for controlled pressure ranges and capacities in a wide variety of distribution, industrial and commerical applications. A 299H Series regulator has a pilot integrally mounted to the actuator casing. The 299H Series regulators can handle inlet pressures up to 175 psi (12,1 bar) depending on orifice size.
- Types 1098-EGR and 1098H-EGR regulators provide economical and accurate pressure control in a wide variety of applications; natural gas distribution systems; fuel gas supply to industrial boilers, furnaces, ovens, and mixers; and large commercial / industrial establishments such as shopping centers and schools. They are also used in plant air service and in liquid service where a slow stroking time (approximately 30 to 90 seconds) is desired on both opening and closing the main valve.
- The Type 99 gas regulators provide a broad capacity for controlled pressure ranges and capacities in a wide variety of distribution, industrial, and commercial applications.
- The quick-reacting S200 Series pressure reducing service regulators are typically used in industrial or commercial installations to minimize the shock effect of sudden downstream load changes that might otherwise activate safety shutoff equipment. In such an installation, where gas consumption varies from almost nothing to several thousand standard cubic feet or normanl cubic meters per hour (SCFH or Nm3/h), snap-acting solenoid valves can cause sudden load changes. In addition, the S200 Series has an internal relief to provide overpressure protection in case of main regulator failure.
- The 133 Series direct-operated regulators are ideal for industrial and commercial applications supplying gas to furnaces, burners, and other appliances. A balancing system enables the regulator to control gas pressure accurately for maximum combustion efficiency despite varying inlet pressures.
- The 98H and 98HH Series are direct-operated, spring-loaded backpressure / relief valves. The 98H Series are used in a variety of steam backpressure / relief applications, such as power generation, heating and cooling systems, and process systems. The Type 98HD uses additional loading pressure to maintain relief differential pressure settings. This backpressure / relief valve is used for differential control in steam applications, such as steam atomization of fuel gas for a boiler.
- The 95 Series regulators are a compact, large-capacity, direct-operated pressure regulator. 95 Series regulators are available in 1/4 through 2-inch (DN 15 through 50) sizes and is offered in several different end connection configurations. They are designed to handle pressures up to 600 psig (41,4 bar) and temperatures up to 650°F (343°C). This product can help solve the toughest pressure control applications. Typical applications include superheated steam, steam injection, steam tracing, nitrogen purging, boiler feed water, process chemicals, cooling water, test fixtures, wash tanks, sterilizers / autoclaves, fuel lines, pneumatic supply, and many others.
- The Type 63EG-98HM pilot operated relief valve or backpressure regulator is used for gas or liquid applications. For applications up to 450°F (232°C), the Type 63EG-98HM utilizes high temperature ethylenepropylene (EPR) or Kalrez™ elastomers for Class VI shutoff. If used in a corrosive service, Kalrez™ and other elastomers are available options that offer superior resistance to heat and most corrosive chemicals.
- The Types 1301F and 1301G regulators are self-operated, high-pressure regulators, which can be used where high pressure gas must be reduced for use as pilot supply pressure in pilot-operated regulators or as loading pressure in pressure-loaded regulators. Types 1301F and 1301G regulators can also be used in many other applications as high-pressure reducing regulators for various gases.
- Fisher Type 627W and Type 627WH pressure reducing regulators are direct-operated for liquid service. They are available in 3/4, 1, and 2-inch body sizes and in construction materials to match liquid applications.
- The 95 Series regulators are a compact, large-capacity, direct-operated pressure regulator. 95 Series regulators are available in 1/4 through 2-inch (DN 15 through 50) sizes and is offered in several different end connection configurations. They are designed to handle pressures up to 600 psig (41,4 bar) and temperatures up to 650°F (343°C). This product can help solve the toughest pressure control applications. Typical applications include superheated steam, steam injection, steam tracing, nitrogen purging, boiler feed water, process chemicals, cooling water, test fixtures, wash tanks, sterilizers / autoclaves, fuel lines, pneumatic supply, and many others.
- The Y690A Series direct-contained, spring-loaded regulators provide economical pressure-reducing control in a variety of industrial applications. The Y690A Series design is ideally suited to control fuel gas supply. The rugged casings and sliding pusher post design withstands the full 150 psig (10,3 bar) inlet pressure at both the inlet and outlet connections.
- The 98H and 98HH Series are direct-operated, spring-loaded backpressure / relief valves. The 98H Series are used in a variety of steam backpressure / relief applications, such as power generation, heating and cooling systems, and process systems. The Type 98HD uses additional loading pressure to maintain relief differential pressure settings. This backpressure / relief valve is used for differential control in steam applications, such as steam atomization of fuel gas for a boiler. The 98L Series are direct-operated backpressure/relief valves that are used in a variety of liquid or gas applications, such as pump recirculation, general backpressure, and relief applications. The Type 98LD uses additional pressure loading to maintain relief differential pressures or backpressure.
- The Y690VB Series vacuum breakers are used for precise control of small capacity, low-pressure service applications where an increase in vacuum must be limited. These direct-operated vacuum breakers come in 3/4 or 1-inch (DN 20 or 25) body sizes and have a 1/4-inch (6,4 mm) or 1/2-inch (12,7 mm) orifice.
- Types 1098-EGR and 1098H-EGR regulators provide economical and accurate pressure control in a wide variety of applications; natural gas distribution systems; fuel gas supply to industrial boilers, furnaces, ovens, and mixers; and large commercial / industrial establishments such as shopping centers and schools. They are also used in plant air service and in liquid service where a slow stroking time (approximately 30 to 90 seconds) is desired on both opening and closing the main valve.
- The Type SR5 regulator is a compact, large capacity, self-operated pressure reducing regulator. It is designed for use in applications where a sanitary design is essential, such as pharmaceutical, biotech, or food and beverage industries. The unit is available in 1/2 through 3-inch (DN 15 through 80) sizes with end connections that will match up to Tri-Clamp® sanitary fittings. The Type SR5 is suitable for use in steam, liquid or gas service.
- The Type 92C self-powered valve is a cost effective pressure reducing regulator used in steam service. This valve is available with a Type 6392 pilot or without a pilot for use as a pressure-loaded regulator. The pilot-operated version uses inlet pressure as the operating medium; no separate air supply is required. The pressure-loaded version is used where remote adjustment of the valve pressure setting is required.
- The Type 92B Pressure Reducing Valve (PRV) is the standard steam valve for the industry. It can withstand dirty operating environments while providing accurate and stable pressure control. The Type 92B steam valve is designed to provide decades of continuous service. The Type 92B steam valve is applied as a main pressure reducing valve in industrial process heating applications such as heat exchangers, evaporators, digesters, and reactors.
- The Type 92B steam valve is diaphragm actuated, thus providing a simple, accurate, and easily maintained valve. The Type 92B steam valve is rated for inlet pressures to 300 psig (20,7 bar) at 600°F (316°C). The inlet (upstream) steam operates the pilot in this self-powered control valve.
- The Type 92S self-powered control valves are piston actuated for high cycle steam service. The Type 92S control valves and pilot use lapped seating surfaces that have been proven to minimize seat leakage. The Types 6492H and 6492L pilots have bellows sealed stems to eliminate stem guide friction. The steel and stainless steel Type 92S control valves are available with a set point range of up to 250 psig (17,24 bar) and a maximum temperature of 650º F (343º C).
- The Type 92S control valves can be used as a working monitor by adding a second Type 6492 pilot. The intermediate pressure must be high enough to meet the minimum differential pressure requirement of the second regulator. Pilot supply for the second regulator can be connected to the upstream system. When intermediate pressure may be too low (minimum differential pressure is pilot supply pressure minus outlet pressure).
- These valves should be used with clear, dry or superheated steam.
- The 95 Series regulators are a compact, large-capacity, direct-operated pressure regulator. 95 Series regulators are available in 1/4 through 2-inch (DN 15 through 50) sizes and is offered in several different end connection configurations. They are designed to handle pressures up to 600 psig (41,4 bar) and temperatures up to 650°F (343°C).
- This product can help solve the toughest pressure control applications. Typical applications include superheated steam, steam injection, steam tracing, nitrogen purging, boiler feed water, process chemicals, cooling water, test fixtures, wash tanks, sterilizers / autoclaves, fuel lines, pneumatic supply, and many others.
- The Type ACE97 Pad-Depad valve is a self-contained, pilot-operated valve that maintains a blanket of inert gas on top of a stored product to protect it from atmospheric contamination. It reduces combustibility, decreases vaporization, controls vapor space pressure during pump-in and pump-out operations, and helps prevent the tank from entering a vacuum condition and collapsing upon itself. The Type ACE97 valve provides excellent and accurate pressure control of the vapor space in the tank. Blanketing pressure is kept to a minimum in order to conserve the use of blanketing gas.
- The Type 1190 low pressure gas blanketing valve is a pilot-operated, pressure reducing valve with a supply pressure regulator. This valve is used for extremely accurate pressure control on very low pressure gas blanketing systems. The Type 1190 helps to control emissions and provides protection against any contamination from atmospheric conditions by providing a flushing action.
- The Type 1290 vapor recovery regulator is a self-contained, pilot-operated regulator system used for vapor recovery blanketing gas. When blanketing gas pressure inside the vessel rises, due to thermal heating or pumping-in of product, the Type 1290 regulator senses an increase in vessel pressure and vents excessive internal tank pressure to a vapor recovery storage tank.
- The Y690A Series Gas Blanketing Regulator System reduces a high-pressure gas, such as nitrogen, to maintain a protective environment above any liquid stored in a tank or vessel. The regulator system replaces the volume of vapors with a volume of blanketing gas to prevent the internal vessel pressure from decreasing, when liquid is being pumped out or when the vessel is suddenly cooled, causing vapors to contract. In both cases a slight positive vessel pressure prevents outside, air, moisture and other contaminants from entering the vessel.
- The Type Y690A is a direct-operated regulator used for accurate pressure control on very low pressure blanketing systems. Downstream pressure is sensed through a pitot tube installed in the lower casing of the regulator, thus no external control line is required. The Type Y690AM uses a control line to more accurately control the pressure if the regulator is mounted away from the tank
- The SR8 backpressure regulator is a compact, large capacity, direct-operated backpresure regulator. It is designed for use in applications where a sanitary design is essential, such as pharmaceutical, biotech, or food and beverage industries. The unit is available in 1/2 through 3-inch (DN 15 through 80) sizes with end connections that will match up to Tri-Clamp® sanitary fittings. The Type SR8 is suitable for use in steam, liquid or gas service.
- The GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids, gases, and vapors. It is designed to meet the requirements of both EN and ANSI standards.
- InsertText
- Valve body sizes DN 15 to DN 100 (0.5 inch through 4-inch) and Pressure Classes PN 10-40 Class 150 and 300. Shutoff capabilities of Class IV, V and VI. It is available with a complete accessory package, including the integrated FIELDVUE® DVC2000 Series digital valve controller and optional metal bellows seal.
- The DVC2000 Series digital valve controller is simple to use, compact, and designed for easy mounting. It converts a 4-20 mA input signal into a pneumatic output signal, which feeds the control valve actuator.
- The high performance, linkage-less feedback system eliminates physical contact between the valve stem and the positioner. There is no wear of parts so cycle life is maximized. Additionally, the elimination of levers and linkages reduces the number of mounting parts and the mounting complexity.
- Positioner replacement and maintenance is simplified because the feedback parts stay connected to the actuator stem.
- Designed to meet intrinsically safe and non-incendive requirements, this instrument delivers scalable functionality and high performance in a small package.
- The Type 3661electro-pneumatic, single-acting positioner is used with various actuators on sliding-stem valves for throttling applications.
- This rugged positioner provides a valve position proportional to a standard milliampere dc input signal received from a control device.
- FIELDVUE® DVC6000 Series digital valve controllers are HART® communicating, microprocessor-based current-to-pneumatic instruments. Three important functions are performed by the DVC6000 Series instrument.
- Traditional positioning of a control valve by converting the 4-20mA dc input signal from the process controller to a pneumatic output signal to the actuator.
- Automatic calibration and configuration utilizing the power of microprocessor technology.
- Communication capability via the HART communications protocol to provide instrument and valve diagnostic information.
- This instrument provides one platform for any pneumatic actuator application. The DVC6000 Series can be installed on sliding stem, rotary, double acting or single acting actuators.
- The Type 3582i electro-pneumatic, single-acting positioner is used with diaphragm-actuated, sliding-stem control valve assemblies.
- The electro-pneumatic valve positioner receives an electronic input signal from a control device and modulates the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal received from a control device.
- The Type 3620J electro-pneumatic, single-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications.
- The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a pneumatic input signal.
- The Type 3610J pneumatic, single-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications.
- The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a pneumatic input signal.
- The Type 3610JP pneumatic, double-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications.
- The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a dc current input signal
- The Type 3660 pneumatic, single-acting positioner is used with various actuators on sliding-stem valves for throttling applications.
- This rugged positioner provides a valve position proportional to a pneumatic input signal received from a control device.
- The Type 3620JP electro-pneumatic, double-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications.
- The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a dc current input signal.
- Baumann™ Little Scotty™ industrial control valves are intended for general utility service in pressure, flow and temperature control applications. This control valve is positioned to take advantage of the trend toward industrial grade requirements spanning general utility to special applications.
- The Little Scotty valves exhibit low hysteresis and deadband, good control characteristics, tight shutoff, rugged construction, high performance packing and easy main tain ability. These attributes translate into reduced maintenance costs, reduced process variability, and increased process availability, resulting in lower long-term operating costs.
- The Baumann™ 24003 3-Way Bronze or Stainless Steel Control Valve 24003 3-Way Rugged Industrial Control Valve For Mixing and Diverting Applications
- The 24003 3-way control valve is ideally suited for control of flow and temperature where mixing or diverting service is required. This 3-way valve uses a rugged cast bronze or 316 stainless steel body with 316 austenitic stainless steel trim for extended service life.
- This compact carbon steel control valve is positioned to take advantage of the trend toward industrial grade requirements spanning general utility and special applications. These control valves exhibit low hysteresis and deadband, good control characteristics, tight shutoff, rugged construction, high performance packing and easy maintain ability. These attributes translate into reduced maintenance costs, reduced process variability, and increased process availability, resulting in lower long-term operating costs.
- Baumann™ 24000S versatile, pneumatic control valve may be used for the control of pressure, temperature, level and flow. Sizes 1/2 inch through 2 inch are available with NPT and buttweld end connections. A 3 inch size is available as wafer style only. The type 316 stainless steel body will withstand mildly corrosive fluids, yet is economical enough to use in applications where carbon steel is normally specified.
- The Baumann™ 24000CVF and 24000SVF line of control valves can be utilized for the control of pressure, temperature, level, and flow. These valves are available with ASME CL 150RF, 300RF, or PN 10-40 flanged end connections.
- The high performance 24000CVF and SVF designs feature low deadband and hysteresis, high flow capacity, superb control characteristics, tight shutoff and advanced packing systems to meet demanding service conditions. Compact and light weight make them ideal for installation in high density piping systems where space is a premium.
- Baumann's unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide range of process liquids, gases and vapors. This very compact package provides the connection integrity of flanged body globe valves while being significantly lighter and easier to install.
- Special alloy constructions are available; N08020, N10276, and N04400 Nickel Alloys round-out the standard type 316L stainless steel offering.
- The 24000F serves as a general purpose, modulating valve suitable for process line pressures up to 1440 psig (99 barg) and operating temperatures to 1000°F (537°C).
- Baumann™ 24000SB shown with Type 32 Actuator and Fisher® DVC2000 Controller This rugged control valve is recommended for low flow, high pressure, industrial control applications.
- A type 316/316L stainless steel barstock valve body and bonnet is suitable for process pressures to 3000 psig (206 barg) and ideal for applications that exceed the operating range of our other 24000 series valves.
- Various end connections ranging from threaded (standard), buttweld, and flanged add versatility to this high pressure product line.
- Baumann's 26000 is a unique corrosion resistant control valve featuring a flangeless wafer valve body and powerful multi-spring diaphragm actuator. This valve is available with a FIELDVUE® Digital Valve Controller to allow for highly accurate, low flow control of nearly all corrosive media.
- A solid corrosion resistant R05200 Tantalum or N10276 Nickel Alloy valve plug and pressure-assisted PTFE seat combine for an extremely wide control range making the 26000 series ideal for pH control applications.
- Low Flow Control Valves The unique 51000 control valve is optimally designed for demanding low flow, high pressure control applications often found in laboratories and pilot plants. Assemblies, 1/4 inch or 1/2 inch in size, come standard in either investment cast stainless steel or N10276 nickel alloy. Constructions with other high nickel alloys are available.
- With a small footprint, less than 10 inches tall, and multiple trim capacity reductions available to meet changing process requirements, the 51000 is a perfect fit where space is at a premium and flexibility is a must.
- The Baumann™ 81000 Mikroseal™ control valve is excellent for throttling of liquid or gaseous media particularly where wide flow variations are encountered. Its packless design allows for applications where leakage prone stem packings are not tolerated.
- The Baumann™ 83000 sanitary control valve is excellent for the control of high purity fluids or gaseous media. A low friction force amplification mechanism, comprised of a roller bearing linkage, produces high positioning resolution suitable for direct operation from remote I/P signal converters.
- The 83000 features a packless design and is intended for laboratory flow rates as low as 0.001 liters per minute (l/m) with a Cv range of 0.00001 to 0.7. This innovative design also allows for clean-in-place (CIP) and sanitize-in-place (SIP) procedures and is selfdraining.
- The Baumann 84000 sanitary control valve is designed to satisfy the stringent demands of the pharmaceutical and biotechnology industries. These valves are in compliance with 3-A Sanitary Standards, Inc. requirements.
- The patented control valve is excellent for throttling high purity liquid or gaseous media commonly found in the food and beverage, pharmaceutical, film, and biotechnology industries.
- The valve is suitable for repeated steam sterilization cycles with 35 psi (2.4 bar) maximum steam pressures.
- Baumann™ 89000 sanitary control valves provide control solutions for various sanitary process systems. These valves meet FDA and UPS CLVI standards and are acceptable for cleaning in place (CIP) and sanitizing or steam in place (SIP) operation. All metal parts in contact with the media are made of 316L stainless steel and each valve comes standard with a stainless steel actuator to resist corrosion from caustic wash down.
- The Design RSS lined globe-style valve is a one-piece valve body which has pure-modified (reinforced) PTFE trim parts, push-down-to-close action, and positive shutoff.
- The sophisticated PTFE trim has replaced the previously used glass-filled or carbon-filled standard PTFE trim without any loss of mechanical or thermal properties and has improved the universal chemical resistance.
- This valve is for applications involving severely corrosive and toxic flowing media and is well-suited for pure media applications, as well.
- Valves for general, erosive, cavitating, or noisy applications. DN25 to 300x200 and 1/2 to 24x20-inch sizes.
- Choice of balanced or unbalanced trim and metal or soft seats. Temperatures to 538ºC. Pressures to DIN PN160 and Class 900.
- ENVIRO-SEAL® and HIGH-SEAL packing. FIELDVUE® digital valve controllers.
- Three-way cage-guided throttling or flow-switching (on-off) service. Cast Iron Valves - flanged: 1- through 6-inch Class 125 flat-face or 250 raised-face flanges; screwed: 1/2- through 2-inch.
- Steel and Stainless Steel Valves - flanged: 1- through 6-inch Class 150, 300, and 600; screwed or socket welding: 1/2- through 2-inch; buttwelding: 1- through 6-inch.
- Single-port, high -pressure valves widely used in oil and gas production. These valves are especially useful for either throttling or on/off control of liquids or gases which are gritty, sticky, or which have a tendency to build up on internal valve parts.
- Body and end connection constructions are available for API as well as ANSI standards. Trim and bolting materials are available for applications handling sour fluids and gases. NACE MR0175-2002.
- Globe- and angle-style valves for high-pressure steam, hydrocarbon, or general service, including cavitating liquids or noisy gases and vapors. Temperatures to 537ºC and pressures to PN160 (Class 2500) and sizes from DN25 through DN100 DIN and 1 through 20 inches ANSI.
- ENVIRO-SEAL® and HIGH-SEAL packing systems to help ensure compliance with environmental emissions requirements. FIELDVUE® digital valve controllers.
- The Design D2 FloPro control valve is a compact, rugged valve designed for on-off control. This valve is ideal for use as a dump valve on gas separators and scrubbers. It is also well suited for other high pressure applications in natural gas production, compression, and processing.
- The Design D2 FloPro valve has threaded end connections and is available in an NPS 1 globe style valve body.
- The Design D3 FloPro offers easy maintenance. The trim and packing can be maintained by removing the patented deep-bore hammer nut and lifting the actuator/bonnet assembly off the valve without disassembling the actuator.
- The Design D3 FloPro control valve is available in 1- and 2-inch Class 900 NPT end connections and 2-inch Class 600 raised face flanged end connections.
- This valve is ideal for use on pressure and flow control applications within the oil and gas production industry.
- IThe trim and packing can be maintained by removing the patented deep-bore hammer nut and lifting the actuator/bonnet assembly off the valve without disassembling the actuator.
- The unique D4 design provides additional protection if disassembly of bonnet/valve body connection is started while there is still pressure in the valve body. Pins mounted in the valve bonnet help ensure the bonnet disengages from the valve body as the hammer nut is removed, while the threads are still engaged.
- The Fisher® V150 is a single flange valve for throttling or on-off operation for many different applications in the process industries.
- The V150 is available in NPS 1 through 20, CL150 (DN 25 through 300, PN 10/16). Trim components are interchangeable between Design V150, V200 and V300.
- Trim components are interchangeable between Design V150, V200, and V300 valves. This feature allows you to reduce your spare parts inventory and maintenance procedures. The seal assembly can be changed without removing the actuator or without removing the ball from the valve body.
- Precise contouring of the Vee-Ball provides a modified equal percentage flow characteristic. For very precise control of low flow rates, the Micro-Notch option is available on the 1-inch size valve.
- The Type Vee-Ball valve combines globe valve ruggedness with the efficiency of a rotary valve. A shearing action between the V-notch ball and the ball seal promotes smooth, nonclogging operation. The unrestricted straight-through flow design provides high capacity for gas, steam, liquids, and fibrous slurries.
- The Design V150, V200 and V300 valves mate with a variety of ASME raised face flanges, as well as with DIN flanges.
- To meet specific application requirements, a variety of metal and soft ball seal materials are available.
- The Fisher® V500 is a flanged or flangeless eccentric plug valve with reversible metal or ceramic seat ring and splined shaft.
- V500 is available in NPS 1 through 8 (flangeless available only in NPS 3 through 8), CL150/300/600 (PN 10/100) (NPS 3 through 8), CL300 (PN25/40).
- This valve is for use in heavy slurry or corrosive applications.
- The Fisher® CV500 is a flanged or flangeless eccentric plug valve valve with reversible metal seat ring and splined shaft. Design CV500 is available in NPS 3 through 12 (DN 80 through 300) , CL150/300/600 (PN 10 through PN 100).
- The camming of the ball permits high capacity flow, and the valve body (being similar to the V500) gives it rugged strength.
- The Fisher® Control-Disk™ rotary valve offers excellent throttling performance. An equal percentage flow characteristic provides an improved throttling range comparable to that of a segmented ball valve.
- This improved capability allows you to control closer to the target set point, regardless of process disturbances, which results in a reduction in process variability.
- The Fisher® 8580 rotary valve offers excellent throttling performance. An approximately linear flow characteristic provides precise throttling control. The 8580 valve offers high cycle life and rugged reliability.
- The Fisher® 8560 is a high-performance butterfly valve with a splined shaft for throttling control. The 8560 is available in NPS 2 through 12, CL150 and CL300. With a flangeless (wafer) or single flange body and wide variety of seals, it can be used in most industry applications. The NPS 2 valve is multi-rated to CL150/300/600.
- The Fisher® 8532 is a high-performance butterfly valve with a splined shaft for throttling control. This valve is available in NPS 14 through 24, CL150 and CL300. With a flangeless or single flange body and wide variety of seals, it can be used in most industry applications.
- The Fisher® POSI-SEAL® A81 rotary valve with FieldQ® rack-and-pinion actuator offers automated on-off, quarter-turn performance. It is available in spring-return and double-acting piston designs.
- The Fisher® A41 is a high-performance butterfly featuring a double D shaft for on-off service. A41 is available in NPS 2 through 12, CL150 and CL300. The NPS 2 valve is multi-rated to CL150/300/600. A41 along with 1035 Rack and Pinion Actuator is part of the POSI-SEAL Package.
- The Fisher® A31A is a high-performance butterfly valve featuring a keyed shaft for on-off service. A31A is available in NPS 14 through 24, CL150 and CL300. This valve is available in either a flangeless wafer-style design, or a single-flange (lugged) body. The Cryogenic version (see color picture) of this valve is available in NPS 3 through 24.
- The Fisher® 8510B is a multi-class rated flangeless valve for throttling control. The 8510B valve is available in NPS 2 through 12, CL150, CL300 and CL600 (PN 10 through PN 100 compatible). 8510B is available with a splined shaft or a double D shaft. 8510 is a flangeless valve, with a splined shaft for throttling control. 8510 is available in NPS 14 through 24, CL150 (PN 10 and PN 16 compatible). These valves feature an eccentrically mounted disk and a PTFE or 316 stainless steel seal ring.
- The Fisher® A11 is a high-performance butterfly valve featuring a keyed or square-end shaft for various on-off applications. A11 is available in NPS 3 through 24, CL600 (both keyed and square-end shafts), and NPS 30 through 48, CL150/150, CL150 and CL300. This valve is available in either a flangeless (wafer) style, or a single-flange (lugged style).
- The GX 3-Way is rugged, reliable, and easy to select. The internal valve trim is designed to ensure long service life and avoiding unnecessary maintenance. The same construction may be used for both converging and diverging applications.
- The GX 3-Way meets the requirements of both EN and ASME standards. It is available with a complete accessory package, including the DVC2000 integrated digital valve controller.
- The GX 3-Way trim characteristics are designed for accurate temperature control in heat exchanger applications.
- The 67D Series direct-operated regulators and filter regulators are typically used to deliver constant reduced pressure of gaseous fluids to pilot-operated controllers and other pneumatic instrumentation
- Body Size NPS 1/2,NPT
- Increased Capacity
- Max Inlet Pressure: Filtered 250psig, Unfiltered 400psig
- Outlet Pressure : Aluminium construction 0-125psig, Stainless steel construction 0-150psig
- The Fisher 4320 wireless position monitor is a non-contacting wireless position transmitter and limit switch. It is a rugged measurement device that provides a precise wireless feedback signal to indicate equipment position with a percent (%) of span plus on/off indication. The 4320 can be used to monitor equipment such as valves, sliding-stem regulators, displacement and float level sensors, and relief valves.
- The FIELDVUE DVC6200 digital valve controller is a HART communicating instrument that converts a two-wire 4-20 mA control signal into a pneumatic output to an actuator. It can easily be retrofitted in place of existing analog positioners on most Fisher and non-Fisher pneumatic actuators.
- The high performance, linkage-less feedback system eliminates physical contact between the valve stem and the DVC6200. There are no wearing parts so cycle life is maximized.
