Eaton MTL | <p>The MTL600 range of digital indicators enable process variables to be displayed locally in hazardous and general purpose plant areas. A typical example would be the re-transmission of mass/flow computations from the safe area, through a suitable MTL IS interface to the indicator in the hazardous area.</p><p>The displays are loop powered from the 4-20mA process signal and their low voltage drop allows them to be installed in almost any 2-wire, 4–20mA transmitter loop. All units can indicate measured values in a linear or a square root extraction mode; the latter being used, for example, to display flow from differential pressure measurement devices such as orifice plates, Dall tubes, or venturi.</p><p>The MTL661 Field mounting unit is housed in a tough aluminium enclosure, suitable for wall or pipe mounting. For corrosive atmospheres use the MTL663 - the plastic case provides excellent resistance to harmful contaminents.</p><p>The MTL665 is the panel mounted version and is IP65, IP66, IP67 and NEMA4 rated.</p><p>MTL66x IS indicators are classified as ‘non-energy storing’ simple apparatus so they can be inserted into any IS loop without recertification.</p>